Travel Time Calculator

Estimate journey duration and arrival time from distance, average speed and planned stops.

Travel Time Calculator

Coaches on motorways commonly average 60–80 km/h including slowdowns.

About this tool

Operators don't always publish journey durations in a way we can verify. This calculator lets you build your own estimate from distance, a realistic average speed and the stops you expect. If you add a departure time, it shows a rough arrival time, including whether you arrive the next day.

How to use it

  1. Enter the road distance (see the route pages or the distance calculator).
  2. Choose a realistic average speed. Lower it for city sections, fog or hilly roads.
  3. Add the number and length of stops.
  4. Optionally enter your departure time to get an arrival estimate.

How it works

Duration = distance ÷ average speed + stops × minutes per stop.

Worked example

375 km at 70 km/h is 5 h 21 min of driving. One 20-minute stop brings it to 5 h 41 min. Leaving at 07:00 gives an estimated arrival of about 12:41.

Planning tips

  • Add extra time for winter fog on the Punjab motorways.
  • Allow time for getting to and from the terminal, which is often the least predictable part of the journey.
  • For connections, leave a generous gap between your estimated arrival and the next departure.

Choosing an average speed

The single biggest factor in the result is the average speed you choose. Remember that average speed is not cruising speed. It includes slowing for toll plazas, interchanges, climbs, roadworks and traffic when leaving and entering cities. Some practical starting points for planning:

SituationPlanning average
Motorway-heavy coach journey65–75 km/h
Mixed motorway and highway55–65 km/h
National highway through towns45–55 km/h
Hilly or mountain roads30–45 km/h
Winter fog conditionsLower, and plan for possible holds

These are rough planning assumptions, not measured operator speeds.

Planning stops

Short journeys of two or three hours may have no scheduled stop at all. Longer ones commonly include rest or meal stops, and very long trips may have several. If you don't know the plan, ask the operator when booking. For a cautious estimate, assume one stop of 20–30 minutes every four hours or so of driving.

Worked example: an overnight long-haul trip

Suppose you are planning a 1,230 km journey departing at 18:00, with an assumed average of 65 km/h and four stops of 25 minutes each.

  • Driving: 1,230 ÷ 65 ≈ 18 h 55 min
  • Stops: 4 × 25 = 1 h 40 min
  • Total ≈ 20 h 35 min, arriving around 14:35 the next day

The calculator shows the "+1 day" marker automatically. Use the result to decide whether you need a hotel at the other end, and when to tell someone to meet you. Always replace your estimate with the operator's stated arrival time once you have a ticket.

Door-to-door time

For many trips the intercity leg isn't the whole story. Add the time to reach the departure terminal (including the reporting time before departure) and the time from the arrival terminal to your destination. On a short corridor like Lahore–Faisalabad, these transfers can be a third or more of your total travel time. That is worth knowing when you choose between terminals or decide whether a day trip is realistic.

Limitations

This is not an operator timetable. Actual journey times depend on traffic, weather, road works and operational decisions.

Related tools

Frequently asked questions

What average speed should I use for a bus?
For motorway-heavy routes, 65–75 km/h is a reasonable planning figure once slowdowns are included. Use less for highways through towns.
Why does my estimate differ from the ticket?
Always rely on the operator's stated departure and arrival times. Use this tool only for planning around them.
Can I use the calculator for a car journey?
Yes. Use your own average speed and the stops you plan to make.
Does it account for time zones?
Pakistan uses a single time zone, so domestic journeys need no adjustment.
Is my data saved or sent anywhere?
Calculations happen in your browser. Nothing is sent to a server. Only the packing checklist saves ticks, in your own browser storage.