Travel Fuel Average Calculator

Measure your vehicle's real fuel average (km/l and L/100 km) using the full-tank method.

Travel Fuel Average Calculator

About this tool

Manufacturer fuel figures are measured in test conditions. Your real average depends on how and where you drive. The full-tank method is the simplest accurate way to measure it, and the result makes every other fuel calculation on this site more realistic.

How to use it

  1. Fill the tank to full and note the odometer reading.
  2. Drive normally, ideally at least a few hundred kilometres.
  3. Refill to full, note the litres added and the new odometer reading.
  4. Enter the readings and calculate.

How it works

km/l = (end − start) ÷ litres. L/100 km = litres ÷ km × 100. Cost/km = amount paid ÷ km.

Worked example

Odometer 42,100 to 42,520 (420 km) with 33 litres refilled gives 12.7 km/l, or 7.9 L/100 km.

Planning tips

  • Use the same pump and fill to the same level both times for better accuracy.
  • Measure motorway and city driving separately. The difference can be large.

The full-tank method, step by step

  1. Fill the tank until the pump clicks off. Don't top up beyond the click.
  2. Note the odometer reading. Resetting a trip meter to zero also works.
  3. Drive normally until you need fuel again, ideally after most of a tank.
  4. Fill again at the same pump if possible, stopping at the first click.
  5. Note the litres added and the new odometer reading.

The litres you added equal the fuel you used since the last fill. Dividing the distance by those litres gives your real average.

Worked example

The odometer reads 42,100 km at the first fill and 42,520 km at the second, so 420 km were driven. The pump shows 33.0 litres added, costing PKR 8,910 in this example. The calculator gives:

  • 420 ÷ 33 = 12.73 km/l
  • 33 ÷ 420 × 100 = 7.86 L/100 km
  • 8,910 ÷ 420 = PKR 21.21 per km in fuel

The cost per km is especially useful. Multiply it by any trip distance for a quick fuel estimate, or compare it with a bus fare per km.

Improving accuracy

  • Measure over several tanks and average the results. One tank can be skewed by an unusual drive.
  • Record city and motorway driving separately. They can differ significantly.
  • Use the same pump and the same filling habit each time.
  • Check that tyres are properly inflated. Low pressure increases consumption and wears tyres faster.

What your average tells you

A sudden drop in fuel average without a change in driving style can be an early warning sign: under-inflated tyres, a clogged air filter, dragging brakes or other maintenance issues. Tracking your average over time is a simple way to notice problems early. It also gives you realistic numbers for the fuel cost calculator and road trip planner.

Limitations

A single tank can vary. Average several fills for a dependable figure.

Related tools

Frequently asked questions

How far should I drive between fills?
The longer the distance, the smaller the measurement error. Aim for most of a tank.
Does this work for CNG or diesel?
Yes, for liquid fuels measured in litres. CNG is sold by kg, so the units differ.
Can I use the trip computer's figure instead?
Trip computers are convenient but can be optimistic. The full-tank method checks them against real fuel bought.
What if I didn't fill to full the first time?
The calculation needs both fills to be full. Start the measurement again from your next full tank.
Is my data saved or sent anywhere?
Calculations happen in your browser. Nothing is sent to a server. Only the packing checklist saves ticks, in your own browser storage.